Ayyukan Fim

• Simintin Die: Daidaiton Matsi Mai Girma ga Sassan Rikice-rikice

  Yadda Yake Aiki: Ana saka ƙarfe mai narkewa (aluminum, zinc, magnesium) a cikin injin CNC da aka yi da matsi mai ƙarfin tan 1,000–4,000+, yana samar da sassa masu juriyar ±0.05mm da kuma kammala saman Ra 1.6μm - babu buƙatar injina na biyu don yawancin aikace-aikacen.

  Manyan Fa'idodi:

  •Lokacin Zagaye Mai Sauri: Daƙiƙa 5–60 a kowane ɓangare, cikakke ne ga kayan aikin mota (haɗe-haɗen injin, akwatunan watsawa) da kayan aikin 5G (mashinan zafi, masu haɗawa).

  • Ingancin Kayan Aiki: kashi 98% na yawan amfanin ƙasa ta hanyar amfani da na'urori masu amfani da wutar lantarki/ƙofofi masu sake yin amfani da su, wanda ke rage ɓarna idan aka kwatanta da masana'antar da ke rage yawan amfani da wutar lantarki.

  • 'Yancin Zane: Rage-rage, zare, da kauri na bango mai sirara kamar 0.8mm—wanda ya dace da maƙallan sararin samaniya da kuma wuraren da aka rufe na'urorin IoT.

  Lokacin Amfani: Matsakaicin girma zuwa babba (sassa 500–100,000+). Ɗakin zafi don zinc (ƙarancin wurin narkewa, mai rahusa); ɗakin sanyi don aluminum (ƙarfi mai yawa, juriya ga zafi).

• Simintin Yashi: Babban Aikin Simintin Ƙarfe Mai Yawa

  Ma'aunin Masana'antu: Ana amfani da shi wajen samar da kashi 70% na kayan wasan kwaikwayo a duniya, daga manyan sassan injina (tubalan injin tarakta) zuwa sassaka na fasaha.

  Tsarin Bayani:

  1. Tsarin (itace/ƙarfe) yana ƙirƙirar ramin mold a cikin yashi (yashi kore ko resin da aka haɗa).

  2. An zuba ƙarfe mai narkewa (ƙarfe, ƙarfe, aluminum) a cikin mold ɗin; yana taurare cikin mintuna 30-awanni 2.

  3. An cire yashi; ana yin harbin bindiga/niƙa shi don gamawa.

  Dalilin da Ya Sa Ya Yi Shahara (Tambayoyin Bincike Masu Yawa):

  •Babu Iyakan Kayan Aiki: Mai araha ga ƙananan girma (sassa 1-100) da manyan kayan aiki (har zuwa tan 10).

  •Daidaita Karfe: Yana aiki da dukkan ƙarfe, gami da ƙarfe mai kauri da tagulla.

  •Sauƙin Zane: Ƙwayoyin halitta masu rikitarwa don tsarin ramuka (jikin bawul, gidajen famfo).

  Iyakoki: Kammala saman (Ra 12.5–50μm); ya dace da sassan da ke buƙatar injina ko shafa.

• Zuba Jari: Daidaiton Lost-Kakin don Tsarin Lissafi Mai Tsanani

  Fasahar Cikakkun Bayanai: Ƙirƙiri sassa masu kauri bango na 0.2mm da girman fasali na 0.1mm—wanda ya dace da ruwan turbine, dashen magani, da kayan ado.

  Matakan Tsarin Aiki (Sharuɗɗan Bincike Masu Sauyi):

  1. Tsarin kakin zuma mai siffar 3D ko kuma allura; an haɗa shi cikin "itatuwa."

  2. An shafa harsashin yumbu (matakai 5-10); kakin zuma ya narke ("kakin da ya ɓace").

  3. An zuba bakin ƙarfe, cobalt-chrome, ko aluminum a cikin harsashi; an sanyaya kuma an cire harsashi.

  Muhimman Fa'idodi:

  • Ba a Bukatar Kusurwoyin Zane: Abubuwan da ke cikin gida masu rikitarwa (rafuka masu ketarewa, siririn yanar gizo) za a iya cimma su ba tare da wasu ayyuka ba.

  • Juriya ga Zafin Jiki Mai Tsanani: Ya dace da manyan alloys na sararin samaniya (Inconel, Hastelloy) da titanium na likitanci.

  •Kammalawar Sama: Ra 1.6–3.2μm, wanda ya cika ka'idojin Aerospace AS9100 da kuma ka'idojin likitanci na ISO 13485.

  Mafi kyau ga: Matsakaicin girma (sassa 50-5,000) da aikace-aikace masu inganci.

• Simintin Centrifugal: Ƙarfin Juyawa don Silinda Masu Daidaito

  Yadda Yake Aiki: Karfe mai narkakken juyi a gudun 300–3,000 RPM a cikin kwalin kwance/tsaye, wanda ke tilasta yawan datti zuwa waje da kuma ƙazanta zuwa tsakiya—yana kawar da ramuka a cikin bututu, bearings, da gangaren bindiga.

  Fa'idodin Tsarin Aiki (Shugabannin Binciken Masana'antu):

  • Tsarin Coreless: Sassan da ba su da ramuka (tushen bawul, ƙafafun jirgin ƙasa) waɗanda aka samar ba tare da tsakiya na ciki ba, wanda ke rage farashin kayan aiki.

  • Daidaito a Inji: Tsarin hatsi ya daidaita ta hanyar ƙarfin centrifugal, yana ƙara ƙarfin juriya da kashi 15-20%.

  • Tanadin Kayan Aiki: Siffar da ke kusa da raga tana rage injina da kashi 50% idan aka kwatanta da simintin gargajiya.

  Ya dace da: Samar da kayayyaki masu yawa (sassa 10,000+) na sassan silinda masu daidaitawa a cikin ƙarfe mai launin toka, jan ƙarfe-nickel, da ƙarfe na aluminum.

Tambayoyin da ake yawan yi game da simintin ƙarfe

• Wadanne karafa ne ake da su don yin amfani da su a cikin tsarin aikinku?

  Muna sarrafa nau'ikan karafa da ƙarfe iri-iri, kamar ƙarfen carbon, bakin ƙarfe, aluminum, zinc, tagulla, da ƙarin kayan aiki. Zaɓin ƙarfe tare da ƙirar geometric na ɓangaren yana nuna hanyar da ta fi dacewa ta yin amfani da shi.

• Shin KINGMETAL kamfani ne mai ƙera kaya kai tsaye?

  Eh, KINGMETAL wani kamfanin kera ƙarfe ne na ƙasar Sin wanda ke da takaddun shaida waɗanda suka haɗa da ISO 9001, IATF 16949, da BSCI. Wanda ya kafa kamfanin Zhiyu Tu ya kawo fiye da shekaru ashirin na gogewa a masana'antar kera. Muna gudanar da wuraren samarwa guda uku a ƙasar Sin, jimillar faɗin murabba'in mita 20,000 na wurin aiki—wannan kayan aikin yana ba mu damar haɓaka ƙarfin samarwa ba tare da rage inganci ko tsawaita lokacin samarwa ba.

• Ta yaya zan zaɓi tsakanin simintin da yashi?

  Tuntuɓi injiniyoyinmu.

  Muhimman abubuwan da ke haifar da hakan:

  •Ƙara: Simintin da aka yi da ƙarfe don sassa 500+; simintin yashi don sassa 1-500.

  •Geometry: Cikakkun bayanai masu rikitarwa? Zuba jari. Girman girma? Zuba yashi.

  • Kasafin Kudi: Babban farashi na farko ga kayan aikin simintin da aka yi da ƙarfe; ƙarancin farashi na farko ga tsarin simintin yashi.